Amusement equipment is usually delivered to the customer’s designated location in the form of loose parts, and large and complicated equipment manufacturers will arrange professional technicians to install it on site. Some small and simple amusement equipment can also be installed by customers. The following briefly introduces the installation steps of grand carousel rides:
- Place the base horizontally in the center of the site, and the wire outlet should be placed according to the position of the electric control box you set.
- Connect the big plate with the tire to the base according to the corresponding number, and then install the fan-shaped big plate according to the number to ensure that all screw connections are tight and reliable.
- Install the chain well to ensure that the card is in place.
- Place the center pole in the center of the base, tighten the screws, then install the umbrella stand stand on the top of the center pole, install the triangular umbrella stand on the umbrella stand pole, and connect the outer arc link with the straight line Install the pole in the middle of the triangular umbrella stand, then stretch the umbrella cloth and fasten the straps.
- Install the eight poles of the umbrella frame between the triangular umbrella frame and the large plate, and tighten the screws.
- Install the carbon brush plate on the fixing bracket on the side of the conductive ring (middle of the base), press down the carbon brush, connect the screws of the motor wire to the carbon brush holder, and connect the wire end under the base to the electric control box. At the terminal post under the motor connector, connect the main power cable head to the main switch. Check that all connectors must be fastened without looseness, eliminate possible hidden dangers, and start after connecting the power (the voltage of the two-phase power cannot be lower than 180V).
- After the boot can be started normally, the horse can be installed on the horse’s bobbin, and then the horse can be installed on the periphery, the horse can be installed on the inner ring, the screw can be tightened after adjusting the angle, and the installation work is basically finished.
The charm of grand carousel rides lies in its luxury, and its luxury comes from its complicated decoration, which may be tedious to install, but not difficult. If you are interested and patient, you can install it yourself. In addition, if you buy the carousel ride equipment to catch the temple fair, you should be able to disassemble it.Need price? or Have question? Get your FREE quote now.